NetApp ONTAP Training Course

Buildroot is an open-source project that includes scripts for generating a cross-compilation toolchain, a customisable root filesystem image, and a Linux kernel tailored for embedded devices. Throughout this hands-on course, participants will learn how to use Buildroot to:

• Select the software to be included in the root filesystem.
• Add new packages and modify existing ones.
• Integrate support for new embedded boards.

By the end of the course, participants will have produced bootable filesystem images. Remote sessions utilise the QEMU emulator, while in-person training can be conducted using either QEMU or real embedded boards, at the trainer's discretion.

Other projects with similar objectives include the Yocto Project and OpenWRT. Please refer to these presentations to determine which solution best meets your needs.

Course Objectives

To provide a clear understanding of the essentials of embedded GNU/Linux, explaining how the various components fit together. You will learn what is required to build an embedded GNU/Linux system, where to source the necessary elements, and how to configure, build, and install them. The course also covers where to find support and addresses critical questions regarding software licensing. Through hands-on exercises, you will gain the practical experience needed to confidently develop your own embedded GNU/Linux systems upon successful completion of this training.

Description

This five-day training programme combines practical exercises with expert instruction to illustrate the core concepts of embedded GNU/Linux, designed to get you up to speed quickly. The philosophy, concepts, and commands essential for effective use of GNU/Linux are explained through a blend of theoretical knowledge and on-the-job training.

Instead of reinventing the wheel, learn from an experienced trainer and take away a working knowledge of GNU/Linux, along with the ability to apply it effectively in your own embedded development projects.

Who should attend?

This course is ideal for managers, project managers, software, hardware, development, and systems engineers, testers, administrators, technicians, and any other stakeholders interested in the technology who wish to understand how Embedded GNU/Linux works as quickly as possible. You should either already be using GNU/Linux or have the latitude to decide whether adopting it makes sense for your needs. Perhaps you have already attempted to use Embedded GNU/Linux but are unsure if you followed the correct approach. Alternatively, you may currently be using a different operating system and want to determine whether GNU/Linux could offer a better and/or more cost-effective solution.

Delivery Options

All training materials are provided in English, but the delivery of the content can be conducted in either English or German, according to your preference, with global availability.

• On-site – instructor-led
• Online – instructor-led
• On-site/online combination – instructor-led

A two-day course comprising approximately 60% hands-on labs, focusing on the internals and architecture of the Embedded Linux kernel, along with practical development techniques and guidance on writing and integrating various types of device drivers.

Who should attend?

Engineers with an interest in Linux kernel development for embedded systems and platforms.

This is a two day course covering all basic principles of building Embedded linux Systems, around 60% of the entire course time is practical hands-on implementation for real world application using the same standards and tools used in industry

In this instructor-led, live training in New Zealand participants will learn step-by-step how to build an embedded Linux system from the ground up. From creating a minimalistic kernel to configuring boot-up and initialisation processes, participants will gain the tools, techniques and mindset needed to deploy a fully functional embedded Linux system.

For remote training sessions, QEMU will be used to emulate the hardware. Other platforms, including actual hardware devices, may be considered on a case-by-case basis.

An embedded system is a specialised computer system designed to perform specific functions within a larger mechanical or electrical setup, typically operating under real-time computing constraints.

Description

This five-day training course combines practical exercises with instructional guidance to illustrate the core concepts of GNU/Linux kernel internals and device driver development. The curriculum is designed to accelerate your learning curve. We cover the essential processes, concepts, and commands required to write GNU/Linux device drivers, blending theoretical knowledge with hands-on training.

Instead of starting from scratch, learn from an expert trainer and gain the practical knowledge and ability to apply it effectively in your own embedded development projects.

Who should attend?

This course is ideal for individuals interested in or tasked with the development or evaluation of GNU/Linux device drivers, including software engineers, field engineers, (project) managers, and hardware engineers.

The LEDE Project (Linux Embedded Development Environment) is a Linux-based operating system derived from OpenWrt. It serves as a comprehensive replacement for the vendor-provided firmware on a broad range of wireless routers and non-networking devices.

In this instructor-led, live training session, participants will learn how to configure a wireless router based on LEDE.

Audience

• Network administrators and technicians

Course Format

• A blend of lecture, discussion, exercises, and extensive hands-on practice

In this instructor-led, live training in New Zealand, participants will learn how to create a build system for embedded Linux based on the Yocto Project.

By the end of this training, participants will be able to:

• Understand the fundamental concepts behind a Yocto Project build system, including recipes, metadata, and layers.
• Build a Linux image and run it under emulation.
• Save time and effort when building embedded Linux systems.

Description

This four-day training blends theoretical knowledge with practical exercises to introduce participants to the Yocto Project.
It addresses common queries such as:

• Is it truly necessary to employ a different version of the toolchain, libraries, or packages for every GNU/Linux project, alongside adhering to a distinct workflow?
• Can you guarantee that the development environment remains consistent across all developers and suppliers, allowing you to produce identical builds today and in over a decade's time?
• Can the YP assist in identifying the software licenses applicable to the packages you utilise?

Practical sessions are conducted on target hardware (for instance, the Beagle Bone Black Rev. C - http://beagleboard.org/BLACK). Upon completion of the training, you will be able to download a Docker image containing Ubuntu 14.x with all dependencies pre-installed, along with examples, to facilitate working with the course material in your own laboratory environments. Please note that this is not an introductory course on Embedded GNU/Linux. Participants should already understand how Embedded GNU/Linux operates and possess the ability to configure and build the GNU/Linux kernel and its drivers.

Who should attend?

This course is designed for those who already use GNU/Linux for their projects and have likely heard of the Yocto Project but have hesitated to explore it further or encountered difficulties in its use. If you are unsure whether and how your daily workflow can integrate with the YP, or if you generally find the YP complex and question its necessity given previous perceived simplicity, this training will help you decide if the YP is suitable for your needs. The workshop is aimed at software engineers, development engineers, system engineers, testers, administrators, and other interested parties who have a solid understanding of Embedded GNU/Linux.